FREIGHT HAULER CATALOGUE - E-Cart
 
 
IMPORTANT INFORMATION - Please read first

This section defines the basic terminology used in the industry and throughout this catalogue.

BREAKING STRENGTH CAPACITY - is the maximum load a component or an assembly, such as a strap, will withstand before failure, measured in pounds (lbs.).

WORKING LOAD CAPACITY - is the maximum working load a component or assembly should be subjected to during use. C.V.S.A. recommend a working load capacity equivalent to no more than one third (1/3) of the breaking strength capacity of the component or assembly.

RATED LOAD CAPACITY - is the industry or legislative standard and may vary from Province to Province, but is usually the same as the working load capacity.

Please note: All the above ratings are based on new items, being used under normal conditions. We recommend that all tie downs and components be inspected before each use and that any worn, damaged, deformed or overloaded items be discarded and replaced immediately.

Remember: "A CHAIN IS ONLY AS STRONG AS IT'S WEAKEST LINK." This applies to tie downs as well. In any assembly, the component with the lowest breaking strength will probably fail first.

Don't forget - the attachment point on the vehicle must be at least as strong as the tie-down itself.

 
 
Mover's Equipment and Supplies Ltd.
FLAT BED WINCH STRAPS
END HARDWARE PART No. WIDTH LENGTH BREAK STRENGTH WORKING LOAD CALIF RATING PRICE $

CHAIN END

WS-210-30CH 2" 30 ft. 10,000 lbs. 3,300 lbs. 6,000 lbs. 20.25 ea.
WS-315-30CH 3" 30 ft. 15,000 lbs. 5,000 lbs. 9,000 lbs. 26.95 ea.
WS-420-30CH 4" 30 ft. 16,200 lbs. 5,400 lbs. 12,000 lbs. 29.75 ea.

DELTA RING

WS-210-30DR 2" 30 ft. 10,000 lbs. 3,300 lbs. 6,000 lbs. 16.20 ea.
WS-315-30DR 3" 30 ft. 15,000 lbs. 5,000 lbs. 9,000 lbs. 19.95 ea.
WS-420-30DR 4" 30 ft. 16,200 lbs. 5,400 lbs. 12,000 lbs. 21.10 ea.

FLAT HOOK

WS-210-30F 2" 30 ft. 10,000 lbs. 3,300 lbs. 6,000 lbs. 15.55 ea.
WS-315-30F 3" 30 ft. 13,000 lbs. 4,300 lbs. 9,000 lbs. 19.95 ea.
WS-420-30F 4" 30 ft. 15,000 lbs. 5,000 lbs. 12,000 lbs. 26.95 ea.

WIRE HOOK

WS-210-30W 2" 30 ft. 5,000 lbs. 1,650 lbs. N/A 15.55 ea.
WS-315-30W 3" 30 ft. 11,000 lbs. 3,650 lbs. N/A 19.95 ea.
WS-420-30W 4" 30 ft. 15,000 lbs. 5,000 lbs. N/A 26.95 ea.

Back To Top
FLAT BED RATCHET STRAPS
END HARDWARE PART No. WIDTH LENGTH BREAK STRENGTH WORKING LOAD PRICE $

FLAT HOOK

RS-210-30F 2" 30 ft. 10,000 lbs. 3,300 lbs. 27.00 ea.
RS-315-30F 3" 30 ft. 15,000 lbs. 5,000 lbs. 66.65 ea.
RS-420-30F 4" 30 ft. 15,000 lbs. 5,000 lbs. 71.75 ea.

WIRE HOOK

RS-210-30W 2" 30 ft. 10,000 lbs. 3,300 lbs. 27.00 ea.
RS-315-30W 3" 30 ft. 15,000 lbs. 5,000 lbs. 66.65 ea.
RS-420-30W 4" 30 ft. 15,000 lbs. 5,000 lbs. 75.60 ea.

CHAIN END

RS-210-30CH 2" 30 ft. 10,000 lbs. 3,300 lbs. 36.25 ea.
RS-315-30CH 3" 30 ft. 15,000 lbs. 5,000 lbs. 84.50 ea.
RS-420-30CH 4" 30 ft. 16,200 lbs. 5,400 lbs. 94.50 ea.
Back To Top
WINCHES and ACCESSORIES
PART NO. DESCRIPTION WEIGHT PRICE $
TW4-S Short Slider Winch (4" Webbing) 8.4 lbs. 17.35 ea.
TW4-P Portable Winch w/screws (4" Webbing) 9.0 lbs. 20.95 ea.
TW2-LW Lashing Winch (2" Webbing) 3.0 lbs. 14.25 ea.
PART NO. DESCRIPTION WEIGHT PRICE $
WB-PS Winch Tensioning Bar - Painted 5.0 lbs. 11.90 ea.
WB-CS Winch Bar-Chromed 5.0 lbs. 16.25 ea.
CC-4S Steel Corner Caps 2.0 lbs. 4.05 ea.
CC-4P Plastic Corner Caps 0.75 lbs. 1.85 ea.
CC-4R Rubber Corner Protector 1.0 lbs. 3.50 ea.
TW2-LW Lashing Winch (2" Webbing) 3.0 lbs. 14.25 ea.

SLIDER WINCH

 

PORTABLE WINCH

 

LASHING WINCH

 

STEEL CORNER CAP

 

PLASTIC CORNER CAP
Back To Top
RUBBER TARP TIES
PART NO. DESCRIPTION WEIGHT CARTON QUANTITY PRICE $
TT-9 9" Tarp Tie-Down c/w Hooks 10.0 lbs. 50 0.99 ea.
TT-15 15" Tarp Tie-Down c/w Hooks 12.0 lbs. 50 1.25 ea.
TT-21 21" Tarp Tie-Down c/w Hooks 15.0 lbs. 50 1.45 ea.
TT-31 31" Tarp Tie-Down c/w Hooks 19.0 lbs. 50 1.65 ea.
TT-41 41" Tarp Tie-Down c/w Hooks 25.0 lbs. 50 1.95 ea.

TARP GUARD
Back To Top
MISCELLANEOUS

CHAIN ASSEMBLY

LEVER TYPE BINDER
PART NO. DESCRIPTION PRICE $
CHA-516-30 Chain Assy. 5/16" G70 x 20' w/Hooks 55.35 ea.
LB-516 Ratchet Type Loadbinder 5/16" - 3/8" 55.65 ea.
LB-516L Lever Type Loadbinder 5/16" - 3/8" 22.30 ea.
CRLD-33 Coil Rack Light Duty - Steel *P.O.R.
CRHD-38 Coil Rack Heavy Duty - Steel *P.O.R.
Back To Top
RUBBER WHEEL CHOCKS & BUMPERS
PART NO. DESCRIPTION WEIGHT PRICE $
1048 H.D. Contoured Wheel Chock 9.5 lbs. 29.95 ea.
1047 Light Duty Piramid Chock 8.0 lbs. 22.95 ea.
1042 Rubber Truck Bumper 2" x 2" x 8" 1.5 lbs. 8.10 ea.
1044 Rubber Truck Bumper 6" x 3" x 3" 2.0 lbs. 9.45 ea.
1045 Rubber Truck Bumper 8" x 5" x 3" 4.0 lbs. 13.45 ea.
Back To Top
RUBBER FOOT LOAD BARS
PART NO. DESCRIPTION WEIGHT PRICE $
ALB-1 Aluminum Load Bar 90" - 104" 10.0 lbs. 53.25 ea.
SLB-1 Steel Load Bar 90" - 104" 11.0 lbs. 34.95 ea.
ALB-3 3 pc. Storable Load Bar 90" - 104" 11.0 lbs. 64.25 ea.
Back To Top
INTERIOR VAN TIE-DOWNS
CAM / MOVERS STRAPS
END HARDWARE PART No. WIDTH LENGTH BREAK STRENGTH WORKING LOAD PRICE $

SPRING E

CBS-2-12E 2" 12 ft. 2,500 lbs. 800 lbs. 14.95 ea.
CBS-2-16E 2" 16 ft. 2,500 lbs. 800 lbs. 16.25 ea.
CBS-2-20E 2" 20 ft. 2,500 lbs. 800 lbs. 17.95 ea.

WIRE HOOK

CBS-2-12W 2" 12 ft. 1,500 lbs. 500 lbs. 12.65 ea.
CBS-2-16W 2" 16 ft. 1,500 lbs. 500 lbs. 14.90 ea.
CBS-2-20W 2" 20 ft. 1,500 lbs. 500 lbs. 16.85 ea.
Back To Top
INTERIOR RATCHET STRAPS
END HARDWARE PART No. WIDTH LENGTH BREAK STRENGTH WORKING LOAD PRICE $

SPRING E

RS-23-12E 2" 12 ft. 3,300 lbs. 1,100 lbs. 21.95 ea.
RS-23-16E 2" 16 ft. 3,300 lbs. 1,100 lbs. 24.25 ea.
RS-23-20E 2"" 20 ft. 3,300 lbs. 1,100 lbs. 27.50 ea.

WIRE HOOK

RS-23-12W 2" 12 ft. 3,300 lbs. 1,100 lbs. 21.95 ea.
RS-23-16W 2" 16 ft. 3,300 lbs. 1,100 lbs. 24.25 ea.
RS-23-20W 2"" 20 ft. 3,300 lbs. 1,100 lbs. 27.50 ea.
Back To Top
ALUMINUM DECKING BEAMS
PART NO. DESCRIPTION WEIGHT WORKING LOAD PRICE $
DB-102R Aluminum Decking Beam - Regular 20.5 lbs. 2,000 lbs. 67.00 ea.
DB-102H Aluminum Decking Beam - Heavy Duty 24.0 lbs. 3,000 lbs. 75.35 ea.

Back To Top

NOTE: Working load of Decking Beams is 1/3 of the ultimate breaking strength.

1" RATCHET STRAPS / UTILITY STRAPS
END HARDWARE PART No. WIDTH LENGTH BREAK STRENGTH WORKING LOAD PRICE $

WIRE HOOK

RS-13-12W 1" 12 ft. 3,000 lbs. 1,000 lbs. 14.85 ea.
RS-13-16W 1" 16 ft. 3,000 lbs. 1,000 lbs. 16.25 ea.
RS-13-20W 1" 20 ft. 3,000 lbs. 1,000 lbs. 17.55 ea.

WIRE HOOK & DEE

RS-13-12WD 1" 12 ft. 3,000 lbs. 1,000 lbs. 16.25 ea.
RS-13-16WD 1" 16 ft. 3,000 lbs. 1,000 lbs. 17.55 ea.
RS-13-20WD 1" 20 ft. 3,000 lbs. 1,000 lbs. 18.90 ea.

VINYL COATED HOOK

RS-13-12V 1" 12 ft. 1,200 lbs. 400 lbs. 14.85 ea.
RS-13-16V 1" 16 ft. 1,200 lbs. 400 lbs. 16.25 ea.
RS-13-20V 1" 20 ft. 1,200 lbs. 400 lbs. 17.55 ea.

ENDLESS HOOK

RS-13-12EL 1" 12 ft. 3,000 lbs. 1,000 lbs. 12.15 ea.
RS-13-16EL 1" 16 ft. 3,000 lbs. 1,000 lbs. 13.50 ea.
RS-13-20EL 1" 20 ft. 3,000 lbs. 1,000 lbs. 14.85 ea.

VINYL COATED HOOK

CB-11-6V 1" 6 ft. 1,000 lbs. 3,300 lbs. 12.15 ea.
CB-11-10V 1" 10 ft. 1,000 lbs. 3,300 lbs. 13.50 ea.
CB-11-15V 1" 15 ft. 1,000 lbs. 3,300 lbs. 14.85 ea.

GENERAL PURPOSE STRAP

GPS-2-15 2" 15 ft. 300 lbs. 100 lbs. 9.45 ea.
GPS-2-20 2" 20 ft. 300 lbs. 100 lbs. 11.15 ea.
GPS-2-25 2" 25 ft. 300 lbs. 100 lbs. 12.85 ea.
Back To Top
OVERSIZE / LONG LOAD SIGNS

PART # PSL-1 $24.35 ea.

  • Printed both sides, serves double duty

    • 1 side : OVERSIZE LOAD
    1 side : LONG LOAD
  • Heavy Duty Yellow Vinyl with webbing tie points & grommets for easier fastening
  • Black Lettering
18" x 84' - 12 COPY - FRONT

18" x 84' - 12 COPY - FRONT
SAFETY WARNING FLAGS

PART # WF-16 $2.55 ea.

  • 18" x 18" Vinyl Scrim Material, ORANGE or RED fluorescent
  • Grommets for easy fastening to load
Back To Top
TRUCK SAFETY PRODUCTS
FIRST AID KITS
PART # FAK-1 $20.25 ea.
  • Ontario Regulation 1-5 employees
  • Sturdy Plastic Case with Hanger
  • Inexpensive protection
  • Can be personalized for your fleet
 REFLECTING TRIANGLE KITS
PART # RTK-1 $44.55 ea.
  • 3 sturdy folding triangle markers packed in plastic storage case
  • Weighted, slip resistant base
  • Meets or exceeds DOT standards FMVSS125
 
 

COMPANY | PRODUCTS | FREIGHT CATALOGUE | INDUSTRY LINKS
WHAT'S NEW | PRICES | ORDER FORM | DEALS